![]() ![]() When the charging cycle is complete, the POWER light on Roomba will turn solid green.Charging could take up to 16 hours if yourīattery is deeply discharged at the beginning of the charge cycle. Charging time under normal conditions is between 3 – 6 hours depending Your Roomba’s POWER light should pulse red/amber while charging. If your Shark robot vacuum has a flashing red light, this is an indication that the battery is depleted and that the device cannot make it back.Your Home Base, if you have one, should have two solid green lights (one for Power and one for Docked) when it is plugged into the Charger.Your Battery Charger should have a solid green light on when it is plugged into a wall outlet charging Roomba.When you put the 500 or 600 series model on charging, it will show an amber pulse in a battery icon above the CLEAN button. When the vacuum turns off due to no battery, it shows a flashing red light. Under normal conditions, Roomba should charge in this manner: The Roomba 500 and 600 models show a red light indicator when the battery is low. This is what should happen, during the charge cycle: Roomba 400 Series/Discovery Battery and Charging Overview. Otherwise, maybe the charging circuit is defective, and needs maintenance, or replacing? As a sanity check, verify that the charger is working, and that the connections are OK. If the robot has been on the base for an extended period and should be fully charged, but the battery level indicator is not full, please confirm the following: You are connected to your. The Battery Indicator is not reaching full when charging. the charging circuitry (within the iRobot) is not detecting the charge current, and assumes that it is not plugged in. The indicator is located on top of the CLEAN button on the screen and appears as a battery icon.the battery is not taking on any charge (i.e.Your particular issue, if the tune being played is a 4-note tune (in conjunction with the flashing Power Button red LED, is due to a low battery which requires charging:Ĭonnect Roomba to a battery charger (or Home Base) and recharge the battery.Īs your iRobot is continuously making this tune, even whilst charging, this would suggest that either: If the problem cannot be resolved, contact iRobot Customer Care. ![]() Here are the most common error codes and what they mean. At the same time, your robots charging indicators will light up. It also uses sounds to let you know when there's a problem or it needs maintenance. The power indicator on the Home Base turns on for approximately four seconds and then goes out. From the iRobot support site, List of Roomba 400/Discovery error codes:Īs Roomba cleans, it communicates with songs, beeps, and indicator lights. ![]()
0 Comments
Leave a Reply. |